Introduction

The Bently Nevada 330130-045-11-00 is a 3300 XL Standard Extension Cable configured with an Armored FluidLoc® cable for applications where conventional extension-cable construction may not provide enough protection against demanding industrial conditions.

With a 4.5-meter (14.8 ft) length, this model is designed to extend the electrical connection between a compatible 3300 XL proximity probe and Proximitor Sensor. The 045 code identifies the cable length, while 11 specifies the Armored FluidLoc® configuration. The final 00 indicates that an additional agency approval option is not required.

The FluidLoc® design is particularly valuable in machinery environments where oil or other process fluids could present a concern. The armored construction adds mechanical protection around the cable, creating a more robust solution for installations near rotating equipment, bearing housings, compressors, turbines, pumps, and other critical machinery.

Rather than selecting an extension cable based on length alone, the 330130-045-11-00 should be considered as a complete configuration. Its 4.5-meter reach, armored construction, FluidLoc® protection, and 3300 XL compatibility make it a specialized choice for applications where cable durability and environmental protection are priorities.

Technical Specifications

Advantages

Armored FluidLoc® Protection

The most distinctive feature of the 330130-045-11-00 is its 11 configuration, which specifies an Armored FluidLoc® cable. This combines mechanical armoring with additional protection intended for fluid-exposure environments.

4.5-Meter Cable Length

At 4.5 meters, the cable offers a useful balance between reach and manageable installation. It can accommodate machinery layouts where the Proximitor Sensor is positioned several meters away from the probe.

Improved Environmental Protection

The FluidLoc® design is intended to provide an additional barrier against fluid migration along the cable construction. This makes it particularly attractive for installations where oil exposure is a practical concern.

Mechanical Durability

The armored outer construction helps protect the cable from mechanical contact, abrasion, and handling during installation and maintenance.

75 Ω Triaxial Construction

The cable uses a 75 Ω triaxial design, providing the electrical characteristics required for compatible 3300 XL proximity transducer systems.

FEP-Based Construction

FEP insulation and protective materials contribute to the cable's suitability for industrial instrumentation environments where durability and stable electrical performance are important.

Compact Yet Protected Design

Although the armored FluidLoc® construction adds protection, the cable remains relatively compact, with a maximum FluidLoc® cable diameter of approximately 3.9 mm before the armor section is considered.

Reduced Concern Around Fluid Exposure

In installations where lubrication oil or other fluids may be present, selecting a FluidLoc® configuration can provide a more appropriate engineering solution than using a conventional unprotected extension cable.

Clear Part-Number Identification

The model number provides a convenient configuration reference:

• 330130 — 3300 XL Standard Extension Cable
• 045 — 4.5-meter length
• 11 — Armored FluidLoc® cable
• 00 — Additional agency approval not required

This makes the exact cable configuration easier to identify during maintenance and spare-parts procurement.

Suitable for Critical Rotating Equipment

The combination of mechanical protection, fluid-resistant construction, and 3300 XL compatibility makes the 330130-045-11-00 a strong choice for critical machinery-monitoring applications where cable integrity matters.