Technical FAQs

1. Does the 4.5-metre length affect calibration?
   The system is calibrated for this exact length; altering it will disrupt accuracy.

2. Is the 330930-045-05-05 interchangeable with shorter or longer cables?
   No, each cable length is part of the calibrated probe-cable-Proximitor chain.

3. Can this cable be used with 5 mm probe systems?
   It is intended exclusively for the 8 mm 3300 XL series.

4. Is it suitable for high-temperature environments?
   Yes, if within the temperature specifications defined for the 3300 XL system.

5. Can it be field-repaired?
   Repair is not advised; replacement is required if damaged.

6. Does the cable need periodic testing?
   Routine visual inspection is recommended, especially in high-vibration areas.

7. How flexible is the cable for routing?
   It is moderately flexible but should follow recommended bend-radius guidelines.

8. Can the shielding be grounded at both ends?
   Shielding follows the Proximitor-side grounding scheme as per system design.

9. Is it compatible with hazardous-area monitoring setups?
   Yes, when installed as part of an approved 3300 XL configuration.

10. Does replacement require any system recalibration?
    No recalibration is needed if the same model and length are used.