Reliable Monitoring for High-Performance Machinery
The 330104-00-18-10-02-CN 3300 XL 8 mm proximity probe from Bently Nevada is engineered for precise shaft vibration and position measurement in critical rotating equipment.
Designed for CN-certified compliance, this probe is ideal for installations in regulated or hazardous environments. Its robust stainless-steel construction, coupled with high-resolution sensing, ensures long-term stability and reliability for predictive maintenance and continuous machine protection programs.
Technical Specifications
| Parameter | Specification |
|---|
| Probe Diameter | 8 mm |
| Case Length | 180 mm |
| Cable Length | 2.5 m |
| Connector Type | Miniature coaxial ClickLoc |
| Thread Type | M10 × 1 |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Housing Material | Stainless Steel (AISI 303 / 304) |
| Output Signal | DC voltage proportional to gap |
| Linear Measurement Range | 0.25 – 2.5 mm |
| Resolution | ±0.25 μm |
| Frequency Response | Up to 10 kHz |
| Operating Temperature | -35°C to +177°C |
| Shock Resistance | 100 g (11 ms) |
| Vibration Limit | 50 g peak |
| Environmental Protection | IP65 |
| Certification | CN Hazardous Area Approval |
Typical Applications
The 330104-00-18-10-02-CN probe is widely used in critical machinery monitoring, including:
-
Steam and gas turbines
-
Compressors
-
Pumps
-
Electric motors
-
Generators
-
Gearboxes
Its accurate and repeatable measurements support condition-based maintenance programs, helping reduce unplanned downtime and extending equipment life.
Advantages
-
CN-certified for hazardous or regulated areas
-
High-accuracy measurement for shaft vibration and displacement
-
Rugged stainless-steel housing for industrial durability
-
Extended cable length for flexible installation
-
Stable output under dynamic operating conditions
-
Compatible with all 3300 XL monitoring systems
This combination of features ensures reliable machine protection and continuous monitoring performance.
Technical FAQs
1. What does this probe measure?
Shaft vibration and displacement.
2. Is it suitable for hazardous areas?
Yes, CN-certified for regulated environments.
3. What is the cable length?
2.5 meters.
4. Can it handle harsh industrial conditions?
Yes, housing is stainless steel and IP65 rated.
5. What is the frequency response?
Up to 10 kHz.
6. What is the linear measurement range?
0.25 – 2.5 mm.
7. Can it operate in high-temperature environments?
Yes, -35°C to +177°C.
8. What connector does it use?
Miniature coaxial ClickLoc.
9. Is it suitable for continuous monitoring?
Yes, it is designed for long-term operation.
10. Which industries typically use this probe?
Power generation, oil & gas, petrochemical, and heavy manufacturing.
A DCS Q Co., Ltd. - PLC and DCS Industrial Control Equipment Wholesale
